How to prevent seepage, fire, moisture and lightning in steel structure workshop?Today the teenager will tell you about this problem and see how it is implemented.The steel structure workshop is a more common type of workshop, and the steel structure is a building material in the current comparison process.A factory, or factory house, is usually used for production and work.Production workplaces generally require a lot, and anti-seepage, fire prevention, moisture resistance, and lightning protection are more basic points.It's not difficult to do this, let's see how to achieve anti-seepage, fire, moisture and lightning protection.Anti-seepage: When the rain comes, how to prevent leakage?One thing we need to know is that rainwater enters the metal roof through lap joints or joints, so in order to prevent leakage, we need to do a good job of blocking this aspect.How to do it?After using sealing washers for screw ports, they should be hidden and fixed, and the overlapping parts of the plates should be sealed with glue or welded. It is best to use long plates to eliminate overlapping.Fire protection: The steel structure will not catch fire, and even if there is a fire, the metal roofing material will not burn, so don't worry too much about the fire resistance.Moisture-proof: The steel structure workshop can be damp-proof by filling the metal roof layer with thermal insulation cotton, laying a waterproof membrane on the metal roof bottom plate, and having ventilation nodes on the metal roof plate.Lightning protection: Lead the lightning to the ground to prevent the lightning from penetrating the metal roof and entering the room.