With the changes of the times, there are more and more steel structure workshops, but with the extension of the service life, the firmness of the steel structure gradually loosens.How to reinforce these steel structure workshops? Let's see.

Load reinforcement method:

Compared with other reinforcement methods, the load reinforcement method is convenient for construction and more economical and practical.This method is mainly used when the component stress is less than 80% of the steel design strength or the structural damage of the steel structure building is relatively small.In order to participate in the newly added firmware, the rebar rods need to be temporarily unloaded.

Uninstall reinforcement method:

When the structural damage of the steel structure building itself is relatively large, the unloading method is usually adopted. When the stress state of the structural connection point increases due to the damage of the factory structure, it is necessary to temporarily reduce the load on the parts.

Ground reinforcement method:

The foundation reinforcement method is mainly used for the structural damage of the steel structure workshop or the bearing capacity of the original section is too small.At this time, it is necessary to design a temporary support point for the steel structure workshop to strengthen or update the ground support of the steel structure workshop.The replaced steel structural equipment component is then completely unloaded.Of course, when replacing parts, the safety of the entire steel structure shop structure must be ensured.

Local reinforcement method:

The local reinforcement method is to strengthen the connection points of steel members or steel structure plants with insufficient bearing capacity, mainly by increasing the cross section of the steel bar and reducing the length of the steel bar or steel bar.

Comprehensive reinforcement method:

The comprehensive reinforcement method is to strengthen the steel structure workshop, which mainly includes two methods that do not change the static calculation mode of the steel structure and the static mode of the steel structure.Adding or strengthening bracing systems is also an effective way to strengthen steel structural systems.