In recent years, steel structures have developed rapidly and many workshops are built with this material.What types of workshops are built with steel structures? Let's take a look.1. Portal steel structure workshop: Portal steel structure workshop is directly called the gantry system.The factory spindle is perpendicular to the plane, and the large diameter herringbone table is used for clamping and manufacturing parts.This type of engineering is very important for machining heavy and simple machinery with large radial degrees of freedom and relatively small absolute axial degrees of freedom.2. Single-span steel structure workshop: Steel structures are usually equipped with single-span frames of different nationalities, such as four-station horizontal indexing tool racks or multi-station turret active indexing beam frames.3. Double-span steel structure workshop: Double-span steel structure buildings supported by double leaves can be distributed in parallel or vertically.4. Horizontal steel structure workshop: The horizontal steel structure workshop is divided into horizontal steel structure railway track factory and horizontal steel structure inclined railway factory.Its sloping track construction makes the steel structure itself stronger and easier to remove debris.5. The top is a sharp steel structure factory: The steel structure on the top is usually equipped with a universal tailstock or a steel tailstock, which can be used for turning long and small diameter discs.6. Chuck-type steel structure workshop: The chuck-type steel structure workshop has no tailstock and is suitable for turntables (including short shafts).The clamping form is mainly automatic or hydraulic, and the chuck structure has adjustable jaws or non-quenched jaws (ie soft jaws).